Jace, Thanks for the review.
To me its always interesting for information on other setups.
I also found the return of a tube amp to work really...
Ah, I still follow almost daily! And use the AA12 almost daily also!
+1, Jace, Spot on, again!!!
I also have the 52 reissue, The neck cap makes it very "dark".
The first thing, after purchase, was to remove the...
Jace, Slate, Thanks you both for the replies.
The problem is the H9 warbles when switching presets on the AA.
Why does AA switching presets send...
Currently, My setup is the AA12 Midi Out to Midi In of a Eventide H9.
Footswitches 1-5, setup as offset(preset switching) and 6-0 setup as...
I have two Moog EP-3's, Setup traditionally, One for Wah, one for Volume.
F.Y.I, Hadn't used the wah much, because didn't look into setting it...
Yup, seems to be quite "gooder", love it thanks AA.*`
Yes, It is assigned in the Effects Loop (RTN Block-Param A), and remember to enable the VOL block and set the MinA/MaxA.
Its easiest with the...
+ 1 for S-Gear, great sounding software for recording. Had a Studio Devil amp sim at one time, remember it was OK, but S-Gear really is great...
Nice Jace, Thanks for sharing. When I get the time,will check that feature out.
Hence the cable tester, I had made my own cables, years ago, for my home studio (tons of them), at the time I though I wired them correctly...
Molly, Nice sound! Great Song! Thanks for sharing,
Sweet Job NelsonP, Didn't take you long to dial that in.
Sounds fabulous! I have been looking at the PowerCab 112 for quite sometime, mainly for transporting reasons. Currently using a Line 6 DT50 with 4...
I'm interested how it would sound in a 2 x 12, with the V30, I have a Line 6 G12H90 that works great with the v30's in a 4 x 12
And the G12H90 is...
Thanks for the response.
Like the simplicit
Just curious, what speaker setup you using with the Seymour Duncan 170, and is it loud enough?
Yes, Ive heard that (rumor)
Thank you, Jay will give that a try.
Thanks for the reply.
I was hoping for a couple of presets to try of users with this setup. (AA with CLR)
I feel I've given it a...
Separate names with a comma.