Glad you got it worked out!
Best of luck with the recording.
TRS or XLR would both work fine.
Just select a preset and turn off all effect blocks except for AMP and CAB.
In the AMP block, click on the window with the name of the current amp...
Make sure your interface inputs are set to LINE not Instrument.
Make sure 48V phantom power is OFF.
Use the hardware LEVEL knob on the AF to lower...
Make sure to bypass the CAB IR block on the output feeding your amp.
You can use it for any individual effect if you like.
Echo, Compressor, Boost, etc.
The AF3, AF6 and AF12 have an FX loop.
The AFB (AmpliFireBox)...
You'll always have to make adjustments when you change your monitoring source.
Personally I have presets that I dial in for headphone use. I put...
These are the key frequencies for guitar.
If you look at graphic EQ pedals you'll find similar frequency selections.
That is odd as you are using the loop correctly.
Try setting the loop to Parallel and turning the AA3 off.
Turn it back on at set the loop back to...
Technically all the levels in the signal flow add to the sum of the total output level. (Compressor level, boost level, amp level, etc)
Thanks for letting me know. I'll take a look.
This is normal behavior.
Our preset switching is as fast or faster than any other similar product on the market.
Personally I think people fixate...
You need to make sure that the FX loop RETURN level is turned up
on the RTN effect block as that is the volume control for the aux input.
That's excellent news!
Now go enjoy those tones and play more guitar!
Going in to the front won't sound as good.
Try a different cable.
Make sure the FX loop of the amp is active.
Sometimes there is a button on the...
In that case, just plug your guitar in to the AmpliFire and the 1/4" output of the AmpliFire in
the the FX return of your guitar amp. This will...
No. But the manual covers the pitch shifter block in detail on pages 29-33.
Separate names with a comma.