AFB Stage Vol Presets 1

Discussion in 'Discussion' started by Jace Nuzback, Sep 25, 2019.

  1. Jace Nuzback

    Jace Nuzback Senior Member

    Joined:
    Apr 9, 2017
    Messages:
    1,032
    Likes Received:
    706
    Trophy Points:
    113
    Occupation:
    Product Specialist Atomic Amps
    Home Page:
    I created something special for you!
    Stage volume presets for the AFB made with the CLR at 90dB!
    These were made to set your LEVEL knob on full and
    not have any clipping.
    Everyone one of these presets has FX block settings for:
    Gate, Compressor, Echo, Reverb and Boost.
    The PRE TONE EQ uses low frequency ROLL OFF before the amp model on all presets.
    No other EQ parameters are used.
    These all use stock Atomic CAB IR files.
    There is a BOOST dialed in for each preset.
    Some like the B-MAN and the RECTO were made to have the boost on
    as part of the tone. Others like the TOP BOOST and DELUXE
    have a boost to add overdrive to the clean tone.
    These were all created using 3rd Power MagFragg ’77 humbuckers with a DC resistance of 9.5 Ohms.
    There are JPEG images to show you the knob settings used for each preset.
    Jace
     

    Attached Files:

    StellaBlue likes this.
  2. Jace Nuzback

    Jace Nuzback Senior Member

    Joined:
    Apr 9, 2017
    Messages:
    1,032
    Likes Received:
    706
    Trophy Points:
    113
    Occupation:
    Product Specialist Atomic Amps
    Home Page:
  3. Mathias Riots

    Mathias Riots Member

    Joined:
    Dec 20, 2016
    Messages:
    21
    Likes Received:
    8
    Trophy Points:
    3
    Location:
    Oslo
    Home Page:
    GREAT, thanks ALOT Jace :) :) .
     
  4. Yeah

    Yeah Member

    Joined:
    May 11, 2018
    Messages:
    15
    Likes Received:
    5
    Trophy Points:
    3
    Thank you Jace for taking the time to create and post all of the presets in the 3 threads. I really want to try them and one day I will. The problem I’m having is that everyday I get home, power on my AA6, I’ll play a couple notes to make sure everything’s on and to check the volume.....the Next thing I know 1-3 hours fly by and my play time is up!
    I think it’s because of the incredible feel this modeler has that makes it so difficult for me to stop playing once I start. Ive learned that if I have 15 minutes to kill before work, I have to resist playing other wise I’ll be late!
     
  5. reentune

    reentune Member

    Joined:
    Jan 15, 2017
    Messages:
    5
    Likes Received:
    3
    Trophy Points:
    3
    Occupation:
    Business
    Location:
    Most of the Time
    Have you ever posted the same level-type info for the AA 3/6/12? (I assume those would all be the same for each version.)
     
  6. Jace Nuzback

    Jace Nuzback Senior Member

    Joined:
    Apr 9, 2017
    Messages:
    1,032
    Likes Received:
    706
    Trophy Points:
    113
    Occupation:
    Product Specialist Atomic Amps
    Home Page:
  7. Psychotronic

    Psychotronic Member

    Joined:
    Jan 9, 2018
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    1
    I must be doing something wrong, as these presets are super quiet for me. In addition, the delay sound is much louder than the amp tone.
     
  8. Jace Nuzback

    Jace Nuzback Senior Member

    Joined:
    Apr 9, 2017
    Messages:
    1,032
    Likes Received:
    706
    Trophy Points:
    113
    Occupation:
    Product Specialist Atomic Amps
    Home Page:
    Feel free to bring up the AMP block LEVEL parameter in these if you need to.
    These were made to have the LEVEL knob set all the way up without clipping the output
    and be the same output level when you switch between them.
    So you should really turn up the volume with your monitoring source.
    Studio monitors, FRFR, etc.
    As for the ECHO, keep the level at 0dB, but bring the MIX parameter value down
    if you feel it is too high for you.
    Jace
     
    Last edited: Oct 9, 2019

Share This Page

Share