CLR faulty again.....

Discussion in 'Support' started by Phil674, Jun 7, 2017.

  1. Phil674

    Phil674 New Member

    Joined:
    Jun 7, 2017
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Hi guys!
    Can you help??
    really disappointed with my CLR, 2 amp replacements later issues have arisen again after using it a small handful of times with a kemper.
    1 channel keeps cutting out making a loud thudding noise.
    Here's an example


    Thanks in advance for any help

    Regards

    Phil
     
  2. BMoe

    BMoe Member

    Joined:
    Feb 13, 2017
    Messages:
    13
    Likes Received:
    8
    Trophy Points:
    3
    Location:
    Minnesota
    Simple things first, Looks like the input 2 clipping?, Have you tried another source into the input 2 of the CLR to eliminate that Kemper is the source of trouble?
     
  3. Jay Mitchell

    Jay Mitchell Member

    Joined:
    Sep 30, 2015
    Messages:
    5
    Likes Received:
    3
    Trophy Points:
    3
    That is not a channel problem. When the LED in the power switch blinks like that, the cause is either one or more failed power amp modules or a failed power supply. The module can be repaired, but it is definitely not a DIY project.

    You will need to contact support.
     

Share This Page

Share