CLR questions

Discussion in 'Discussion' started by MikeBrooklyn, Apr 24, 2019.

  1. MikeBrooklyn

    MikeBrooklyn New Member

    Joined:
    Apr 24, 2019
    Messages:
    3
    Likes Received:
    1
    Trophy Points:
    3
    HI, I recently got a CLR and I have some questions

    How do you guys set the sub switch?

    As far as dialing in the input gain/master and the level on my amplifier, the input gain LED doesn't light up at all until the level on the amplifier if maxed out. Is this the way I should run it?
     
  2. Jay Mitchell

    Jay Mitchell Member

    Joined:
    Sep 30, 2015
    Messages:
    23
    Likes Received:
    23
    Trophy Points:
    3
    Off is best, unless you're using a subwoofer. In that case, on.

    The level of the signal coming from an Amplifire (3, 6, or 12 - the Box is different) depends on the level settings in the preset you're using and on the setting of the level knob. If you're having to max out both the input level control on a CLR and the Level knob on the AF in order to get the CLR's input LED to light, the level settings in your preset could stand to be increased.
     

Share This Page

Share