Friedman BE and some Progressive riffs

Love this Amp!!!!! I tried to make a tone, that is close to Plini / David Maxim Micic style.

 

Any chance you would share the patches?

 

Yes, patch sharing would be very cool if you are able to

 

Download Link for the preset:
https://www.dropbox.com/s/0xyphzwcw5fr9uj/DTS Modern BE.fbp?dl=0

IMPORTANT

I had to change a stock cab in to this preset. It doesn't sound like the original at all. If you want, you can buy the David Maxim Micic Little Cubes IR PACK and choose a MOON V1 IR from there. That is the IR, that I used in this preset.

Check the IR Pack from here:
https://www.davidmaximmicic.co/product-page/little-cubes-1-ir-pack

 

Thanks, I will try it out this evening.

Oh, what cab is the Moon IR based on? I have a bunch of other IRs I'd like to try before buying even more.

 

Here is one more clip with drums...

 

It is a mix IR, but from the Info I read, that one of the cabs in this IR is ENGL V30

 

Going by the file type: Is this for an Ampli-Firebox? I can't see the file type from my AA6.

 

Yes. I forgot to mention, that I use the Firebox.

 

....and I forgot to ask! Downloaded it last night and it took me a while to realise why I couldn't see it when trying to upload it to my AA12. Duh!

 

Can you give us the basics, like the amp settings and if you used any 'special sauce,' like particular PEQs? I've been playing with that model, and I seem to either get too much bottom, too much gain, or it's too dull.

 

Gate
Treshold -55dB
Ratio 3
Release set to minimum

PRE EQ
Roll Off 200hz
Cut -2.5dB from 300hz with Q7

Boost
Overdrive pedal
Drive 0
Tone 80
Level 6dB

Friedman BE
Drive 6
Master 6
Bass 8
Mid 7
Treple 5
Presence 4
Damping 60

PEQ
-3dB cut from 2600hz with Q10
-3dB cut from 4000hz with Q10
-3dB cut from 5200hz with Q10

Cab
Moon V1 IR (From Little Cubes IR Pack)
High Cut 8000hz

 

Thank you! I will compare this to what I had and add the other filters. I think that pre EQ might get rid of the boom I was getting.

 

That pre-EQ filter was the big piece I was missing. I was reading in another thread earlier about using it for this purpose, this gave me a better idea of how to apply it. I really like the patch, thanks again for taking the time to type it all out for me.

 

(First time posting in the Forum). It's awesome that everyone here is willing to take the time to assist others in their tonal journey... Drop the Sun: Thanks for sharing the above presets! I too have been seeking a better tone preset for Progressive / Low-tuning style composition. Great Job! I run the AA 12 into an Orange OR15 and Carvin 4X12 cab.

 

@drop the sun super generous of you to take time to write out your settings. Your PRE block roll off was really helpful for dialing in my own presets too as I've been fighting the bottom end with the BE model.