Loop Question

Discussion in 'Discussion' started by patmepin15, Sep 16, 2020.

  1. patmepin15

    patmepin15 Member

    Joined:
    Sep 16, 2017
    Messages:
    23
    Likes Received:
    10
    Trophy Points:
    3
    Hi all. I put my SA Collider delay/reverb pedal in the effects loop of my AA3 in SERIES mode. When I cranked the mix of the pedal all the way up, There seems to be a lot of dry signal making its way thru the loop (which is what I would expect from the loop set to PARALLEL mode). If I put the pedal in front of the AA, the mix knob behaves as I typically expect (100%mix = 0% dry guitar). Note that I am ran the pedal stereo and mono back into the return with similar results. Is there a setting I am missing? I am new to the loop in the AA.
    Thanks!
     
  2. Jace Nuzback

    Jace Nuzback Senior Member

    Joined:
    Apr 9, 2017
    Messages:
    1,370
    Likes Received:
    930
    Trophy Points:
    113
    Occupation:
    Product Specialist Atomic Amps
    Home Page:
    That is odd as you are using the loop correctly.
    Try setting the loop to Parallel and turning the AA3 off.
    Turn it back on at set the loop back to Series.
    Double check that your cables are plugged in properly.
    Let me know your results.
    Cheers,
    Jace
     
  3. patmepin15

    patmepin15 Member

    Joined:
    Sep 16, 2017
    Messages:
    23
    Likes Received:
    10
    Trophy Points:
    3
    That worked! Thanks
     
  4. Jace Nuzback

    Jace Nuzback Senior Member

    Joined:
    Apr 9, 2017
    Messages:
    1,370
    Likes Received:
    930
    Trophy Points:
    113
    Occupation:
    Product Specialist Atomic Amps
    Home Page:
    Excellent!
     

Share This Page

Share