Master EQ output section

Discussion in 'Wishlist' started by NickK, Sep 27, 2019.

  1. NickK

    NickK Well-Known Member

    Joined:
    Feb 6, 2017
    Messages:
    71
    Likes Received:
    72
    Trophy Points:
    18
    Would love to see some kind of master EQ section that would come after the cab, with high low cuts, different slopes, maybe parametric and graphic eq etc.

    Lots of times i get better results and tone shaping options when i use Mooer Radar after the AF (with cab off on AF).
     
  2. ConstantinosM

    ConstantinosM Active Member

    Joined:
    Jun 13, 2018
    Messages:
    27
    Likes Received:
    16
    Trophy Points:
    3
    i second that. would be useful if you could access it easily (as in with a key shortcut) for shaping live tone on the spot for different venues
     
  3. Jay Mitchell

    Jay Mitchell Active Member

    Joined:
    Sep 30, 2015
    Messages:
    25
    Likes Received:
    24
    Trophy Points:
    3
    Placement before or after the cab will make no difference. The order in which sequential linear blocks are placed in the signal chain does not matter; the result will be the same. Both the EQ and cab blocks are linear.

    One thing that would be extremely useful is global EQ. That would enable a user to tweak the response to account for room acoustics without having to edit and save individual presets.
     
    JiveTurkey likes this.
  4. Dave_5150

    Dave_5150 Senior Member

    Joined:
    Dec 20, 2016
    Messages:
    448
    Likes Received:
    161
    Trophy Points:
    43
    Yep, global EQ would be great. At one point I used to run an MXR EQ pedal after the AA to do this.
     
  5. Dagwin

    Dagwin Well-Known Member

    Joined:
    Sep 25, 2017
    Messages:
    111
    Likes Received:
    38
    Trophy Points:
    28
    And have a Global Option for using the Treble/Mid/Bass controls on the Amplifire itself as general equilizer.
    Would be very handy for gigs if you need to adjust a bit for the room.
     
  6. NickK

    NickK Well-Known Member

    Joined:
    Feb 6, 2017
    Messages:
    71
    Likes Received:
    72
    Trophy Points:
    18
    Global parametric and high low cuts... That would be handy... If you have brighter PA you can lower that high cut and find that notches that can be nasty...
     
  7. Eric Raymond

    Eric Raymond Active Member

    Joined:
    Apr 8, 2019
    Messages:
    39
    Likes Received:
    4
    Trophy Points:
    8
    +1 on the global setting.
     
  8. Eric Raymond

    Eric Raymond Active Member

    Joined:
    Apr 8, 2019
    Messages:
    39
    Likes Received:
    4
    Trophy Points:
    8
    And while you're at it a global pre eq with volume.
     

Share This Page

Share