MIDI Sends on Presets

Discussion in 'Wishlist' started by Michael Flanagan, Dec 20, 2016.

  1. Michael Flanagan

    Michael Flanagan New Member

    Joined:
    Dec 20, 2016
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Would be awesome if we could add MIDI send commands on individual presets. Bonus points if we can have more than one channel to send on :)

    I would like to be able to create a patch that uses the AA12 for Amp/Cabinet and then an external effects unit (H9) for the specialized effects. As it is now I would either have to punch up the preset on the AA12 and then do the same for the H9 or I would have to add another MIDI controller that would drive both. That really defeats the purpose of having all those buttons on the AA12...

    This would be killer for a live environment. We could create all the necessary presets that also trigger our MIDI capable loop effects with a single unit.
     
  2. MJ Slaughter

    MJ Slaughter Well-Known Member

    Joined:
    Dec 20, 2016
    Messages:
    100
    Likes Received:
    86
    Trophy Points:
    28
    :) More midi would be more better.
     
  3. Gates

    Gates Member

    Joined:
    Dec 20, 2016
    Messages:
    6
    Likes Received:
    2
    Trophy Points:
    3
    Tuner on/off via midi should be a must! :)
     
  4. RCL

    RCL Well-Known Member

    Joined:
    Dec 20, 2016
    Messages:
    52
    Likes Received:
    32
    Trophy Points:
    18
    Doesnt it do this now? I normally use a home made midi controller but if I just scroll presets on the AF it also scrolls them on the M5. If I set the AF to use the on board buttons for presets-the M5 follows that as well. I used to have a button set up so I would use the bass setup on the GSP1101 and a pretty much blank AF setup except I used the bass cab.
     
  5. loremipsum

    loremipsum Well-Known Member

    Joined:
    Dec 20, 2016
    Messages:
    87
    Likes Received:
    60
    Trophy Points:
    18
    Looks like currently there is a limitation on MIDI OUT Channel. According to v4 manual, "The MIDI OUT CHANNEL global setting selects which MIDI channel AMPLIFIRE will transmit program changes on". So it works for preset scrolling (PC messages) but not for MIDI CC messages.
     

Share This Page

Share