Saving Tempo per preset

Discussion in 'Discussion' started by Andy Reider, Oct 26, 2019.

  1. Andy Reider

    Andy Reider New Member

    Joined:
    Sep 16, 2019
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Is it possible to save a tempo for an individual preset? For the life of me I can't figure this out.

    For many applications, tap-tempo is fine. For others, it's way less than ideal. I just got my AF3, but even using the editor can't seem to figure out how to make the AF3 save a specific tempo for an individual preset.

    I want the AF3 to store a tempo, and then send that BPM via midi to my Timefactor and H9. Is this possible? Or am I just missing something obvious?

    Thanks so much. As previously mentioned, I'm new to the AF, but am LOVING it. Such a great unit.
     
  2. Dave_5150

    Dave_5150 Senior Member

    Joined:
    Dec 20, 2016
    Messages:
    463
    Likes Received:
    162
    Trophy Points:
    43
    Yes you can do this. I'm not in front of the editor right now but from memory you need to turn off global tap tempo in the global menu to stop the global bpm in the same menu from overiding any individual preset values.
     
  3. Jace Nuzback

    Jace Nuzback Senior Member

    Joined:
    Apr 9, 2017
    Messages:
    1,068
    Likes Received:
    728
    Trophy Points:
    113
    Occupation:
    Product Specialist Atomic Amps
    Home Page:
    Exactly right. On the GLOBAL tab of the editor change the Tempo parameter from Global to Per Preset.
    In each preset on the ECHO block set the BPM to whatever you need. But you also HAVE to select
    a time signature for at least the first delay tap. 1/4 note, dotted 1/8th note, etc.
    If not the preset will only look to the ms value of delay time instead of the BPM.
     

Share This Page

Share